You’ve studied hard; you’ve practiced your configurations; you’ve used your flash cards over and over again; and finally, the big day is here. Your first certification exam!
For many Cisco certification candidates, their first exam is the CCNA Composite exam or one of the two exams that make up the CCNA, the Introduction To Networking exam or the ICND (Interconnecting Cisco Networking Devices) exam.
Walking into a testing center for the first time can be a nerve-wracking experience. You’ve got enough on your mind just keeping all that new information straight without worrying about what the testing experience will be like.
You’re not there to take the exam. You’re there to pass the exam. With this aggressive attitude in mind, let’s take a look at what you should expect (and not expect) when taking your first Cisco certification exam.
Be Early and Bring Your ID.
If the testing center is not in a part of town that you drive to in the morning, and you’ve got a 9 AM exam, you may find the traffic is much heavier that time of morning than you expected. Driving up to the testing center 10 minutes late is not a good way to get started. If you’ve never been to the center before, check their website for directions, or call them for directions. If at all possible, drive to the center the night before your exam.
Make sure to bring your wallet or purse. You cannot take the exam without proper identification. You’ll probably be asked for two forms of ID, one of which must be a picture ID.
The Testing Room
Despite the best efforts of VUE and Prometric, some testing center rooms are afterthoughts. I strongly advise that if you’re taking your exam at a technical school, ask to see the testing room BEFORE you sign up for the exam. If it looks like a converted broom closet, it probably is. Those rooms also tend to be right next to classrooms, which can result in distracting noise during your exam.
If your testing center specializes in giving computer-based exams rather than classes, you’re probably in good shape. Again, feel free to drop by the testing center before your exam to take a peek at the testing room. Most testing rooms have a window that employees use to keep an eye on testers, and you should be able to take a peek through the window.
When you go in, you’ll be asked to enter your social security number as your testing ID. Once you do that, the exam engine starts running. However, this doesn’t mean the test starts.
The Survey
When you take a Cisco exam, you’ll first be presented with a survey. The survey consists of 10 â€" 20 questions asking about your background, preparation methods, and comfort level with different technologies. This is a good time to catch your breath before starting the exam. The survey will only take about five minutes, and this time does not count against your exam time.
Pay Attention To The Exam Tutorials
You’ll then be presented with an exam tutorial, showing you how to answer the different types of questions Cisco may ask. While most of these questions types are common sense (multiple choice, single answer, fill-in-the-blank), I strongly urge you to pay special attention to the router simulator question tutorial.
The simulator questions carry more weight than the other questions; indeed, it’s almost impossible to pass the CCNA exams if you totally miss the simulator questions. While the interface for these exams is intuitive, sometimes students who fail their exam complain that they were not given enough information to answer the question. The real problem is that they didn’t look in the right place for that information. It’s not hidden, but spend a few minutes with the tutorial and do not go forward until you’re comfortable with the simulator interface.
The Exam Itself
Finally, the exam starts! Remember, you’re not being asked anything you don’t know. If you have prepared correctly with the right tools, you’ll have a passing grade on your screen before you know it.
Speaking of that grade, you’ll be presented with it about five seconds after you answer the final question. Cisco exams no longer allow CCNA and CCNP candidates to go back once a question is answered, so be prepared for that.
Knowing what to expect when you go into the testing room for the first time will magnify your chances of success. Work hard (and smart!) while studying, achieve a combination of theoretical knowledge and hands-on work with real Cisco routers, and you are on your way to exam success!
Chris Bryant, CCIE (TM) #12933, has been active in the Cisco certification community for years. He has written several books that have helped CCNA candidates around the world achieve the coveted CCNA certification, including several concentrating on binary math conversions and subnetting questions that the average CCNA candidate will need to answer on their CCNA exams.
He is the owner of The Bryant Advantage (http://www.thebryantadvantage.com) where he teaches affordable world-class CCNA courses via the Internet, and sells his popular Cisco certification books. He’s proud to have helped CCNA candidates around the world achieve their career goals. Mr. Bryant’s books and courses are sold on his site, on eBay, and on several other major Cisco certification sites.
This Domain Is For Sale
Make your offer here!
Proxicast Introduces The New LAN-Cell 2 High Speed 3G Cellular Router
Proxicast introduces a new rugged secure commercial-grade 3G cellular router with enterprise-class routing and VPN features.
RTcom USA Announces New Ground-Breaking Digital Matrix Routers
New DVI and HDMI Matrix Routers allow delivery of six to eight video sources to the same number of displays.
EnGenius Launches First Wireless N Broadband Router With "Universal Repeater" and "Green Ethernet" Technology
EnGenius Technologies, Inc. launches two wireless N routers into the consumer market. Features include: 6X faster wireless speeds compared to standard 802.11g routers, extended wireless coverage with long range capabilities for those hard to reach spots, unique detachable antenna for increased range & sensitivity, reduced power consumption, enhanced multimedia applications ideal for VoIP, video streaming and online gaming, and easy setup & installation.
Configuring Your Own Adsl Router
Configuring an ASDL router with a local area network is no longer the exclusive domain of computer savvy network administrators and technicians. Routers are becoming increasingly easier to set up according to anyone?s specific needs. Many of these network devices offer an online feature that allows the user to do the configuring in a graphical interface setting after logging in.
ImageStream Ships Enhanced R1 and TransPort Routers
At LinuxWorld Conference & Expo today, ImageStream announced the company is shipping updated versions of its R1? and TransPort? routers. Both routers now offer quadruple the performance of previous versions. The new high-performance CPUs make it possible for both routers to forward 100 Mb ethernet at wire speed, and to support Asterisk for VoIP gateway and SoftPBX applications.
Router Table ? How to Use
Tips, Setup, Bits, Multiple Uses
Would you like to know how to use a Router Table Here are tips to realize the most from your router table
What Is A Broadband Router?
A broadband router is a basic device to set up a wired or wireless network. Broadband routers ensure that all the computers on a network can send and receive data to each other and across the Internet. These routers are of both wired and wireless but their features are very similar.
Cisco Router Password Recovery
Retrieving your password using the majority of Cisco routers is easily achieved by accessing the console port. The problem is that Cisco has bought out a large number of other companies and placed their company label on the router. As a result, password retrieval procedures differ significantly among Cisco devices. Furthermore, the retrieval process changed significantly because of IOS upgrades. The intent of this article is to offer basic instructions that will allow the majority of Cisco device users to accomplish this task. Through following these instructions, you will be able to retrieve your lost password from most Cisco routers. Please note that these instructions are designed to assist those using the 2000, 2500, 3000, 4000, 7000, a...
Point of Entry: Difference Between Hub & Router
For someone who needs a quick clarification on the matter, a hub combines all linked computers or workstations into a network, while router links two separate and distinct networks to each other Hubs generally operate at layer 1 of the open system interconnection (OSI) reference model as compared to the layer 3 of the routers
Lieberman Software Randomizes Remote Access Account Passwords on Cisco Routers and Firewalls
Random Password Manager Adds Support for Cisco IOS Devices